PARTNER CENTRAL - DESIGN
TECHNICAL MEMOS
- Bridge
- OBDP Design Technical Memo #: B001 (Updated May 16, 2006)
Seismic Retrofit Guidelines for Repair Bridges -
OBDP Design Technical Memo #: B002 (Updated May 16, 2006)
Epoxy Injection of Girders and Cap Beams for Repair Bridges
See related content: - OBDP Design Technical Memo #: B003 (Updated February 14, 2006)
Analysis and Design of Repair Bridges - OBDP Design Technical Memo #: B004 (Updated February 14, 2006)
Bridge Rail Retrofit Guidelines for Repair Bridges - OBDP Design Technical Memo #: B005 (Obsolete!)
Seismic Design Guidelines for Replacement Bridges in Seismic Zone 2
(This Technical Memo is obsolete due to changes made to Section 1.1.10.2 in the BDDM Rev. 04/06.) - OBDP Design Technical Memo #: B006 (Updated May 16, 2006)
Widenable Bridge Design Guidelines - OBDP Design Technical Memo #: B009 (Updated May 29, 2006)
Effects of Permanent Repairs on Bridge Load Rating Condition Factors - OBDP Design Technical Memo #: B012 (Updated August 14, 2006)
Bridge Skew within the OTIA III Bridge Program
- CADD
- OBDP Design Technical Memo #: C001 (Updated August 24, 2006)
Axiom SpecChecker Rules Files -
See related content:
- Roadway
- OBDP Design Technical Memo #: R001 (Updated January 23, 2007)
Guidance for Diversion Shoulder Widths in Temporary Work Zones for Projects within the OTIA III Bridge Program - OBDP Design Technical Memo #: R002 (Updated February 28, 2007)
OBDP's Vertical Clearances for Replacement Bridges in Program (Following 01/18/07 Statewide Mobility Meeting)
NOTE If you do not see the file you are looking for, contact the appropriate design coordinator or find it in Workplace.